Equipment for the production of composite materials, created according to the principles and standards of MPI, has been built for more than 35 years. The range of experience in the composite materials industry is from manual molding to automated production systems.
The programmable controllers, power units, pumps, and other components used in MPI pultrusion machines are state-of-the-art. MPI is committed to increasing equipment efficiency and minimizing downtime.
The frame of MPI pultrusion machines is made of high-strength steel, which provides a stable platform - a prerequisite for quality production. The robust frame allows the use of powerful broaching mechanisms and the production of a profile with a high content of reinforcing materials. The higher the percentage of reinforcing materials in the profile, the better its physical characteristics.
Main characteristics of MPI pultrusion lines
| Model |
Maximum pulling force (tonnes) |
Profile dimensions Width x Height |
Broach speed (m/min) |
Number of heating zones |
| MPI 7 |
3.15 |
250 x 90 |
2,4 |
4 |
| MPI 15 |
6,8 |
400 x 150 |
2,4 |
8 |
| MPI 20 |
9 |
610 x 200 |
2,4 |
8 |
| MPI 25 |
11,3 |
660 x 250 |
2,1 |
10 |
| MPI 30 |
13.6 |
915 x 250 |
2,1 |
12 |
| MPI 40 |
18,1 |
1.015 x 300 |
1.5 |
12 |
| MPI 50 |
22.6 |
1.270 x 355 |
1.5 |
12 |
| MPI 100 |
45.3 |
2.795 x 455 |
1.5 |
24 |
